Bayview Wall Bench

Model Number

11”H | BVWB-11S Seat Support | BVWB-11E Seat End | 2 x 6 Re-plast Planks

Bayview Wall Bench

This top wall-mounted bench design can be made in any length and is typically installed on top of a concrete wall or plinth. The aluminum supports angle inwards at a slight angle matching the leg-ends of our Bayview family of products. Optional centre armrests help to create a sense of personal space for the user and help to discourage unwanted lying down or sleeping. Determining what is required for every application is simple. For the 11” high seat each bench requires two ends (BVWB-11E). The number of supports (BVWB-11S) required is determined by the total length and dividing it up to a maximum span distances of 20”. For example,  a 72” bench would have 3 supports 18” apart from each other and a 60” bench would have 2 supports 20” apart from each other.  The lumber comes in 3 lengths  6ft, 10ft and 12ft.  The seat is designed to be 3 boards deep creating a comfortable 17” seating surface.



Product Specifications

100% Recycled Plastic Slats

  • Planks Actual Size 1 7/16 x 5 3/8
  • Standard Lengths are 6,10 and 12Ft
  • This product will not rot, splinter, or warp reducing maintenance costs over the life of the product.
  • Colours Available: Black, Grey, Redwood, Sand, Walnut

Durable Powder Coated Aluminum Supports

  • Spacing Between the Supports NOT TO EXCEED 20”
  • Standard Colours: Brown Slate, Victor Ridge II, Nordic Lichen, Timeless Rust, Grey Gold, Textured Silver, Precious Sand, Groovy Red, Black Textured, Earth Clay, Noble Bronze, Modern Khaki, Flame Red, Pastel Orange, Signal Violet, Traffic Yellow, Ultramarine Blue, Water Blue, Yellow Green
  • BayView Wall Bench Seat showing the 3 SupportsThree standard heights.
    6”   Seat End BVWB-6E   Seat Support BVWB-6S
    8”   Seat End BVWB-8E   Seat Support BVWB-8S
    11" Seat End BVWB-11E  Seat Support BVWB-11S

Long Lasting Stainless Steel Hardware

Customized Solutions

  • Custom Powder Coating (Setup Charges May Apply)

  • 2 x 4 Recycled Plastic Planks. (Must specify)

  • Bolt on Arm Rests (BVWM-ARM)

  • Customizable to any Length

  • INST-1 Stainless Steel Bolt-Down Kit ( Installation Example )

Product Dimensions

BayView Wall Bench End SupportSeat End BVWB-11E

Seat Depth : 17 inches/432 mm
Base Depth : 6 inches/152 mm
Height Including Lumber : 11 inches/279 mm
Weight : 3 lbs/1.4 kg

BayView Wall Bench Seat SupportSeat Support BVWB-11S

Seat Depth : 17 inches/432 mm
Base Depth : 6 inches/ 152 mm
Height Including Lumber: 11 inches/279 mm
Weight : 2 lbs/1.4 kg

Re-plast Lumber

Thickness : 1 7/16 inches/38 mm
Depth : 5 3/8 inches/138 mm
Weight : 3.2 lbs/ft 4.6 kg/meter

Recycled Content

  • Recycled Content By Weight (5 ft bench): 80%
  • 100% Recyclable

Complimentary Products In This Series

Wishbone Site Furnishings
#210-27090 Gloucester Way
Langley, BC CANADA V4W 3Y5
866.626.0476 | [email protected]
site by thejrp