Questions? Feedback? powered by Olark live chat software
Skip to main content

Beselt Backless Wall Top Bench

Beselt Backless Wall Top Bench

  • Model Number:
    BSWTB-6 (6 ft) BSWTB-5 (5 ft)

Designer Notes

Urban and modern, the Beselt Wall Top Bench adds a clean and contemporary look to most park settings. A unique two-piece design makes the bench a cinch to install. It can either be secured to concrete by using our regular fastening system or our innovative “PEG” system. In both cases the base separates from the main section that holds the lumber. To install using the “PEG” system, separate the base from the main section, mark where the pegs line up on the concrete, drill down, fill with epoxy and then set the pegs into the epoxy. Level and let set. The main section slides over and is secured by the bolts on the ends and the fasteners that hold the boards are hidden. The seat sections can be easily removed for cleaning and removed and replaced if any boards are vandalized. The design is simple, sharp and chic.

100% Recycled Plastic Lumber Colours *

Wishbone recycled plastic boards are non-toxic, ultra-durable and low maintenance.  They are easy to clean and can be renewed from UV Damage.  They are an excellent material for the demands of outdoor commercial furniture.

Unstained Natural Wood Alternatives *

For applications where wood is preferred, Wishbone has several options.  Stains specified by the cusomer can optionally be applied by Wishbone during manufacture.

Super Durable Standard Powder Coat Colours *

*Due to variations in the types of screen resolutions available, colors represented here may vary slightly from the actual colors. Please contact Wishbone if you would like to have actual samples.

Material Specifications

  • 100% Recycled Plastic Slats
  • Western Red Cedar
  • IPE Hardwood
  • Accoya Modified Pine

Customized Solutions

  • Custom powder coating (Setup Charges May Apply)
  • With armrests BWB-6024A
  • With center armrest BWB-6024C
  • Custom lengths up to 10 ft
  • Skate blocks
  • PEG Epoxy Mounting System  (Please Specify When Ordering)
  • INST-1 Stainless Steel Bolt-Down Kit (Installation Example)

Product Dimensions

Total Height: 4 inches / 11 cm
Total Depth:
24 inches / 61 cm
Seat Height:
4 inches / 11 cm
Seat Depth: 24 inches / 61 cm
Length: 72 inches / 183 cm
Weight: 113 lbs / 51.5 kg

Recycled Content

  • Recycled Content By Weight: 80%
  • 100% Recyclable